Light adapter
The adapter screws into the ready-made thread on the booth’s top panel and turns it into a stand for lights and photo gear. The thread is already there — no tools required.
What you can mount:
- Studio flash or light — on a pole on top of the booth.
- Photo gear — via the 1/4“→3/8“ spigot.
- Accessory stand — a holder for any pole or rod.
What’s in the box
Section titled “What’s in the box”- ×1 Adapter holder (side thumbscrew)
- ×1 Spigot 1/4“→3/8“
- ✓ Light and pole — your own equipment
Installation
Section titled “Installation”1. Screw the adapter into the top
Section titled “1. Screw the adapter into the top”Screw the adapter into the ready-made thread on the top panel of the booth all the way — by hand, no tools.
2. Insert the pole or spigot
Section titled “2. Insert the pole or spigot”Insert a pole for a light, or the 1/4“→3/8“ spigot for photo gear, into the adapter.
3. Lock with the side thumbscrew
Section titled “3. Lock with the side thumbscrew”Tighten the side thumbscrew by hand. The pole or spigot holds firm — no rotation, no play.
Mount your light or flash on the pole. To remove the gear, loosen the thumbscrew and pull the pole out.