Spare parts & replacements

Here are the spare parts and tools you may need for the Spinner 360, with example links.

Stick-to-platform thumbscrews

M6 × 60 thumbscrews (M6 × 50 is also fine). These secure the stick to the platform.

Stick-angle bolts

M6 × 20, used for changing the angle of the stick.

Belt pulley

Belt pulley GT2, 6 mm, 16 teeth, 5 mm bore, 14 mm total height — used to fix the belt. Example links: Amazon or this one.

Power cable

Power cable, 3 m.

Platform-to-laptop cable

The cable from the platform to the laptop: USB type A – USB type A, 3 m (male–female).

Portable power bank

A portable power bank that fits under the platform. Links.

Soft-case wheels

Wheels for the soft case on Amazon.

GoPro hot-shoe adapter

A hot shoe to ¼“ adapter to connect the GoPro: example.

Hard case (USA)

A hard case available in the USA: Odyssey Spinner 360 case.

Stick

You can sometimes find the stick in local shops. Unfortunately, we can’t give direct links, because vendors change the construction size all the time and we can’t guarantee it will work with your version of the stick. For now, the best option is to buy the stick from our site.

Controller-to-USB cable

The wire that runs from the controller to the USB that plugs into the laptop: Mini USB – USB A (male), 0.5 m. You can also use a longer version to connect the controller directly to the laptop.

Hex key set

A hexagon key wrench set. This comes in handy if you need to tighten or replace the belt pulley.

Socket wrench set

A socket wrench set (8 mm, 17 mm): link. It comes in handy if you want to disassemble the platform into two parts.

Drive belt

Belt GT2, 6 mm width, 1524 mm: link.